Touch 2000

Technical Specifications

• Purification Technology:
• RO + UV + Taste Enhancer

• Purification Cartridges:
• Pre Filter , Sediment Filter, Pre Carbon Filter cum Adsorber, Anti-Scalant Cartridge, RO Membrane, UV Disinfection Column, Silver Impregnated Post Carbon Cartridge

• Purification capacity:
• Upto 15 Litres/Hour

• Max. Duty cycle:
• Upto 75 Litres/Day

• Storage tank capacity:
• 8.5 Litres

• RO Membrane:
• 75/80 Gallon Per Day

• UV Disinfection Column:
• 24 L/Hr (Design Registration No.- 264546)

• Min. Inlet water pressure:
• 0.3 Kg/ Sq.cm*

• Max. Inlet water pressure:
• 3 Kg/Sq.cm**

• Input voltage:
• 140-300 V AC/50 HZ

• Operating voltage:
• 24 V DC

• Product Dimension (W*D*H) (mm):
• 388 * 271 * 500

• Features of Touch 2000:

  • - India’s first advanced touch technology RO water purifier.
  • - Advanced ergonomics to match your modern lifestyle.
  • - Advanced filter change indicator system.
  • - Quick and friendly customer service.
  • - India's first water purifier with push button water dispensing.
  • - Purified water storage capacity of 8.5 litres (approx.).
  • - Customer care number on display panel.
  • - Multiple dispensing options to choose from.


• • * If Input water pressure is below 0.3 kg/Sq.cm, use of Booster Pump attachment is recommended to increase input water pressure and proper functioning of the unit.
  • ** If Input water pressure is above 3.0 kg/Sq.cm, use of Pressure reducing valve is recommended for leak proof and smooth functioning of the unit.
  • # Manufacturer reserves the right to change/replace/upgrade any part or component in pursuit of providing continous improvement in the quality of the products to its esteemed customers.

• Note:

  • - Use a Pre filter cartridge if water contains more than 10 ntu turbidity.
  • - Input Raw water temperature should be between 10°C to 45°C
  • - Total Dissolved Solids in Input Raw Water should not exceed 2000 ppm.
  • - Raw water should be free from Oil & Grease.
  • - Permissible Iron Content in Input Raw Water is 0.3 mg/ltr (max.).
  • - Total Hardness in Input Raw Water should not exceed 600 mg/ltr (max.)